How to control the cost of special saw blade for pipe cutting machine?

How to control the pipe cutting machine, with the imbalance between supply and demand, stainless steel pipe factory profits in the past two years is a sharp decline, and the cost control by the tube factory boss put on the desktop. Tube factory owner choose a good pipe cutting machine, saw no cost control, is no good.
Today, Xiao Bian to you boss count this account, and make some comments.
The use and grinding of the saw blade of the tube cutting machine has always been a difficult problem for the stainless steel tube factory! The grinding problem using poor quality management is not standardized, causing the blade to inflated costs, taking Foshan as an example, because Foshan's stainless steel tube of the whole industry chain is very complete, the blade processing industry developed, Foshan pipe factory basically do not have their own grinding teeth, all external processing, with each pipe factory production pipe cutting cost per ton is about 3.5 yuan. Now, the cutting table is very mature and stable, and the damaged saw blade is very rare! For example, "nine and stainless steel factory" last year statistics show that each tube cutting costs only 2.6 yuan, including the purchase of saw blades, the cost of grinding saw. And part of the tube factory is the early design of immature machines, rising to 5 to 7 yuan per ton, or even higher.
And then come back to say that Foshan outside the tube factory, because too many workers in their own mill teeth, the quality is very unstable! Some even without professional technical training, are self-taught, the quality of grinding teeth can be imagined! Combined with cutting costs per ton, even up to more than ten yuan! Sky high price! You count 1 accounts, to 2000 tons per month, more than 5 yuan per ton more than the cost of more than about 100000 yuan per year, white flower profits so disappeared.
There are many kinds of saw blades used in pipe cutting machines, different tubes and different specifications. The selection of the saw blade is different, select the suitable for the pipe saw blade, if the election of the wrong saw, or thin or thick, it is easy to damage the saw blade. In order to guarantee the long service life, it is necessary for the automatic machine to cut down the feed speed for 10 minutes at the beginning of the cutting, and the next 10 minutes will gradually speed up the speed. The cutting speed determines the type, cross section and toughness of the material to be cut, and the stronger the material, the slower the rotation speed is. The smaller the cross-section of the material, the faster the choice of rotation, and the greater the cross section, the slower the available speed. Selecting the right saw blade is also a major factor in controlling the cost of the saw blade. Cost of saw blades?